PIR SRP-100 include a zigbee module ?

seenn

Other Parts Discussed in Thread: Z-STACK

Dear readers,

i develop actually an application based on z-stack home automation and i look for an end-device (IR) to test my sw ,i had the PIR SRP-100 from crow ,is anyone please have an idea on this device ? crow is not a zigbee-alliance member , and what i found is the SRP-100 dont support zigbee ! anyone can give an addition plz ,and if this PIR didnt support zigbbe home automation do you have an idea for an other PIR wich support home automation (plz give me a reference i just want to test an application with home automation security cluster's on this end-device .

Regards

nadal

over 10 years ago

0 YiKai Chen over 10 years ago

Guru 735695 points

You can try SmartThings motion sensor (shop.smartthings.com/.

0 seenn over 10 years ago in reply to YiKai Chen

Expert 1315 points

if i run the sample application of texas on the gateway (bbb+emkcc2531) , do you have any idea about the IR (wich support home automation protocol ) will appear on the UI of the application or not ,or i should also configure the IR device ?

Regards

0 YiKai Chen over 10 years ago in reply to seenn

Guru 735695 points

If the device is based on Zigbee HA profile, it should join and show on Device list.

0 seenn over 10 years ago in reply to YiKai Chen

Expert 1315 points

And to understand the concepts of zigbee gateway solution ,which basic concepts should i have ???

Regards

0 YiKai Chen over 10 years ago in reply to seenn

Guru 735695 points

To know better about Zigbee, you can read www.amazon.com/.../0750685972.

Zigbee & Thread

Zigbee & Thread forum

PIR SRP-100 include a zigbee module ?