cc2531 , dongle message receive from cc2530 and send on UART

Muhammad Usman

Other Parts Discussed in Thread: CC2531, CC2530

Dear

Message is sent from cc2530 ED to cc2531 , but cc2531 unable to enter in GenericApp_MessageMSGCB( MSGpkt ); to receive message , any idea?

case AF_INCOMING_MSG_CMD:
GenericApp_MessageMSGCB( MSGpkt );

over 10 years ago

0 YiKai Chen over 10 years ago

Guru 735695 points

Does your CC2531 act as coordinator?

0 Muhammad Usman over 10 years ago in reply to YiKai Chen

Expert 2140 points

i selected the co ordinator option from workspace , and compiled and downloaded the code in cc2531 dongle device.
while debugging it occurs as discribed above . and end device is powered up to send message to co ordinator

0 YiKai Chen over 10 years ago in reply to Muhammad Usman

Guru 735695 points

Do you do binding?

0 Muhammad Usman over 10 years ago in reply to YiKai Chen

Expert 2140 points

yes i did , i dont have any idea , that i have to press button on ED to bind , now its working thanks for help

0 YiKai Chen over 10 years ago in reply to Muhammad Usman

Guru 735695 points

You are welcome and it's good to know it works now.

0 Muhammad Usman over 10 years ago in reply to YiKai Chen

Expert 2140 points

thanks :) , i will disturb you more , till the completed

0 YiKai Chen over 10 years ago in reply to Muhammad Usman

Guru 735695 points

Not a problem!

0 Muhammad Usman over 10 years ago in reply to YiKai Chen

Expert 2140 points

thanks ,YK Chen

0 YiKai Chen over 10 years ago in reply to Muhammad Usman

Guru 735695 points

You are welcome.

Zigbee & Thread

Zigbee & Thread forum

cc2531 , dongle message receive from cc2530 and send on UART