controlling any IR device using zigbee

Dhanraj

Guru 14820 points

How to control any IR remote controlled device using ZIGBEE?

over 10 years ago

0 YiKai Chen over 10 years ago

Guru 735695 points

There is no ZCL command define in Zigbee spec for IR remote controller so you have to define a proprietary command to do it.

0 Dhanraj over 10 years ago in reply to YiKai Chen

Guru 14820 points

what are the requirements to define a proprietary command?

what should be the procedure To define a proprietary command ?

0 YiKai Chen over 10 years ago in reply to Dhanraj

Guru 735695 points

You can define your own cluster ID and its own command. You can refer to ON/OFF ZCL command in ZCL spec and try to define your proprietary ZCL command accordingly.

Zigbee & Thread

Zigbee & Thread forum

controlling any IR device using zigbee