Device announce

Do you modify anything in SampleSwitch? I haven't see this problem when I test SampleSwitch.

No I haven't its from fresh install. 

GenericApp makes the association but again deosn't send DeviceAnnce

If a router joins network, it would continuously send LinkStat messages and this is they way to know if Router is working properly. Am I right?

Thanks.

1- How about LinkStat messages? Dongle keeps sending them about evey 15s, but GenericApp doesn't send any LinkStats

2- That flag is defined but I still can't get DevceAnnce in Dongle when I put a breakpoint on MT_ZdoEndDevAnnceCB() It never gets called.

Do you define NWK_LINK_STATUS_PERIOD to 0? NWK_LINK_STATUS_PERIOD is set to 15 by default and it should be issued by Z-Stack automatically.

No I haven't touched it. ONly dongle sends LinkStats.

That flag is defined but I still can't get DevceAnnce in Dongle when I put a breakpoint on MT_ZdoEndDevAnnceCB() , It never gets called.

I can see teh DeviceAnnce packet is sent by GenericApp 3 times when It joins, but it's never get detected in Dongle. MT_ZdoEndDevAnnceCB() and it's previous chain of functions never get called in Dongle. I made sure that flag is defined.

Can you please help with this?

Can you tell me which Z-Stack example you use as go glee coordinator? And, you should check if it hits MT_ZdoEndDevAnnceCB on coordinator not end device.

I am using 1.2.2a OTA Dongle as coordinator on RF06 board, Mesh 1.0.0 GenericApp as Router on RF05 board.

I put the breakpoints in coordinator at right functions as you said. But it never hits that point.

Also, After router associates with Coordinator it doesn't send any LinkStat. 

If you run GenericApp as ZC and ZR, do you see link status on ZR?

WIth GenericApp as ZC on one end and ZR on the other, it's still same. They associate, ZC sends LinkStats but ZR doesn't.

Do I need to register fro Device Announce in Coord code? If yes how?

You only need to define MT_ZDO_CB_FUNC in your coordinator project and should see end node announcement on MT UART console.By the way, I do the test on GenericApp and have no problem to see ZR sends Link Status.