How to compile z-stack home for cc2650?

Maarten Abbink

Other Parts Discussed in Thread: CC2650STK, Z-STACK, CC2650, CC2630

I haven't been able to find a tutorial that explains how I can use IAR to compile z-stack home. My goal is to run it on a cc2650STK, such that it becomes a Zigbee HA temperature and humidity sensor.

Any resources explaining how I should get started on this would be great.

over 9 years ago

0 YiKai Chen over 9 years ago

Guru 735685 points

If you download and install Z-Stack Home 1.2.2a, you can refer to Z-Stack Home Sample Application User's Guide.pdf under C:\ti\simplelink\zstack_home_1_02_02a_44539\Documents.

0 Maarten Abbink over 9 years ago in reply to YiKai Chen

Prodigy 140 points

That document states

The CC2630/CC2650 SampleSwitch application can be found in C:\<Home Automation Install dir>\ Projects\zstack\HomeAutomation\SampleSwitch\CC26xx

However, that directory doesn't exist after installing Z-Stack Home (1.2.2a.44539)

0 YiKai Chen over 9 years ago in reply to Maarten Abbink

Guru 735685 points

You should find it under C:\ti\simplelink\zstack_home_1_02_02a_44539\Projects\zstack\HomeAutomation\SampleSwitch\CC26xx.

Zigbee & Thread

Zigbee & Thread forum

How to compile z-stack home for cc2650?