Z-Stack Linux gateway for supporting Simple metering cluster

Anjali Ramchandani

Other Parts Discussed in Thread: Z-STACK

Hi!

I want to explore Smart energy profile and I am currently using Z-Stack Linux Gateway 1.0.1 in which I didn't find any commands related to simple metering. So I want to know:

1) Does the Z-Stack Linux Gateway 1.0.1 supports commands for simple metering?

2) If yes then how do I use those commands?

3) Where can I find detailed description of the Smart Energy clusters?

over 9 years ago

0 YiKai Chen over 9 years ago

Guru 735685 points

There's no implementation of Simple Metering cluster in Z-Stack Linux Home GW. You have to read latest Zigbee HA spec and do implementation.

0 Anjali Ramchandani over 9 years ago in reply to YiKai Chen

Expert 2685 points

So, you mean if I want to start working on SE profile, I can not use the present version of Linux Gateway?
Then how should I go about starting SE profile?

0 YiKai Chen over 9 years ago in reply to Anjali Ramchandani

Guru 735685 points

Latest Zigbee HA profile also supports Simple Meter cluster. Do you have to use SE profile or you can use HA profile? As I know, there is no GW reference design uses SE profile.

0 Anjali Ramchandani over 9 years ago in reply to YiKai Chen

Expert 2685 points

How do I send commands related to metering cluster from Linux Gateway?

0 YiKai Chen over 9 years ago in reply to Anjali Ramchandani

Guru 735685 points

You can refer to how temperature reading is done in user_interface.c (under Source/Projects/zstack/linux/demo/framework.)

0 Anjali Ramchandani over 9 years ago in reply to YiKai Chen

Expert 2685 points

Thank you for showing a way

0 YiKai Chen over 9 years ago in reply to Anjali Ramchandani

Guru 735685 points

You are welcome.

Zigbee & Thread

Zigbee & Thread forum

Z-Stack Linux gateway for supporting Simple metering cluster