IAS Zone keep sending Enrolment Req after application Response

Mirko Rodic

Other Parts Discussed in Thread: CC2531

Hey! I am using CC2531 Usb Dongle with BeagleBone Black. Every time I join my IAS Zone Sensor to network it sends EnrolmentReq to my gateway application. After that I answer with Zone_enrolment_rsp and I get zigbee_generic_cnf with status success back. But device sends EnrolmentReq again and when i check her ZoneStatus it is 0 so it means it is not enrolled. I dont know what to do anymore so please help. It just don't want to enroll.

I am using this sensor And I upgraded this code with enrolment functions

over 9 years ago

0 YiKai Chen over 9 years ago

Guru 735695 points

It sounds this sensor doesn't implement enrollment correctly. I suggest you to contact sensor maker.

0 Mirko Rodic over 9 years ago in reply to YiKai Chen

Prodigy 90 points

Hey. Thanks for fas response . I have the same problem with other IAS Zones too. They are from the same sensor maker. But if I made a problem it is with ZoneId. I simply put it to be some number. But I work only with one sensor at the time so there is no redudancy. Or is it? Is there any way to check value of ZoneId, I cant find attributeId anywhere in documentation. Where is it stored?

0 YiKai Chen over 9 years ago in reply to Mirko Rodic

Guru 735695 points

I suggest you to check this issue with Ubiqua Packet Analyzer.

Zigbee & Thread

Zigbee & Thread forum

IAS Zone keep sending Enrolment Req after application Response