How to use Z-stack for Home Automation full project with Light, Temperature, Alarms, and how to integrate all coordinator code

Yadamsuren Altankhuyag

Please Help me!!

I was test all code in Z stack.

Sample: Door Lock, Door Lock Controller, and Termostat Temparature,HVAC, Light control, Light Switch. And i was read document Home stack development, user's guide.

But i don't undrestand, I can't control to sampleDoorcontroller, SampleTermostat, SampleSwitch from uController and PC. and how to integrate all coordinator.

So i was use Z-tools

over 8 years ago

0 Ryan Brown1 over 8 years ago

TI__Guru**** 208927 points

Moving this thread to the Mesh networks Forum where their experts should be able to give you the necessary guidance and assistance.

Regards,
Ryan

0 YiKai Chen over 8 years ago

Guru 735535 points

What do you want to control to SampleDoorController, SampleThermostat, and SampleSwitch?

0 Yadamsuren Altankhuyag over 8 years ago in reply to YiKai Chen

Prodigy 70 points

thank you,

When should I use to choose which of the two SampleSW, SampleSwOTA computer to transfer data link. And connect a variety of sensors to read, write and communicate. I intended to transmit wireless data using tablet.

then recording devices are stored array. how to read and write to a computer in the array

0 YiKai Chen over 8 years ago in reply to Yadamsuren Altankhuyag

Guru 735535 points

I suggest you to refer to ZigBee Home Automation Gateway reference design.

Because of the holidays, TI E2E™ design support forum responses will be delayed from Dec. 25 through Jan. 2. Thank you for your patience.

Zigbee & Thread

Zigbee & Thread forum

How to use Z-stack for Home Automation full project with Light, Temperature, Alarms, and how to integrate all coordinator code