hi I'm wondering in the generic app

lee jaeho

Other Parts Discussed in Thread: Z-STACK

Is this a part of this spot somewhere received a message from the generic app?
Can you change the recipient receives the message format?

over 9 years ago

0 YiKai Chen over 9 years ago

Guru 735685 points

Don't understand your question. Can you elaborate?

0 lee jaeho over 9 years ago in reply to YiKai Chen

Intellectual 520 points

i want send hex message but ascii sending,..,,,, so i want sending the hex no ascii

0 YiKai Chen over 9 years ago in reply to lee jaeho

Guru 735685 points

It's no problem to send hex data.

0 lee jaeho over 9 years ago in reply to YiKai Chen

Intellectual 520 points

But when comes the ASCII transfer.

Will output to hexadecimal in any way

0 YiKai Chen over 9 years ago in reply to lee jaeho

Guru 735685 points

What do you mean "will output to hexadecimal in any way?

0 lee jaeho over 9 years ago in reply to YiKai Chen

Intellectual 520 points

Change the format of "themessage" buf to 16uint
If you will be sent the ASCII code 0x1234.

But when I sent in hexadecimal 0x1234 "themessage" buf I hope that I stoked 0x1234

From understanding?

0 YiKai Chen over 9 years ago in reply to lee jaeho

Guru 735685 points

I still don't understand it. But it seems this is only about application and nothing to do with how Z-Stack sends it.

Zigbee & Thread

Zigbee & Thread forum

hi I'm wondering in the generic app