CC1350: IEEE 802.15.4e TSCH with Contiki on CC1350

Thanks YK,
But Thingsquare is a commercial product, not open source, correct?

Yes, Thingsquare is a commercial product, not open source.

That tells me, that implementation is possible, but doesn't help much.
The question is still open, so if anyone can give some pointers, I will appreciate it.
And I am after sub GHz implementaions

I think post a discussion on Contiki github might be more helpful than posing here.

Hi,

correction: on 1350 we (Thingsquare) don't run 2.4 GHz for anything else than BLE beacons. All network activity etc apart from BLE beacons is on sub-GHz.

//Marcus

@jan2809: I am equally interested as you for a contiki TSCH implementation at sub-ghz, but as far as I know there are no open-source solutions available.

@YK: "if you use CC1350 as 2.4G mode, it supposes to work." Is it possible to send 802.15.4 frames at 2.4 GHz using cc1350? For some reason I believed the radio only supported BLE on that band.

Andreas

Hi Andreas, it's my bad to make this mistake. CC1350 2.4G supposes to support BLE not 802.15.4.