• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 55 subscribers
  • Views 949 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CC2650DK: How to get started with Zigbee using CC2650 DK?

Naveen Chowdhury
Prodigy 10 points
Part Number: CC2650DK
Other Parts Discussed in Thread: CC2650, CC2592, Z-STACK

Hi All,

I have two CC2650 DK boards for which I have a plan to flash Zigbee 3.0 stack( which I dont know how) and communicate  & transfer data between two. Next , connect sharp display TI board to see the current data.

Can you please help me how to flash Zigbee stack , step by step, if any guide possible?

Also, how much long range can I get using CC2592 with CC2650 and with 5 dB antenna , how can range be increased?

  • 0
    Guru 735695 points
    You cannot run Z-Stack 3.0 on CC26xx. Z-Stack 3.0 only supports CC253x. If you have to use CC26xx, you can only run Z-Stack Home 1.2.2a which you can download from www.ti.com/.../z-stack-archive . By the way, CC26xx doesn't have enough Flash to run Z-Stack coordinator and router in SOC mode. You have to use ZAP-ZNP architecture if you want to run coordinator or router using CC26xx. For end device, it's no problem.