LAUNCHXL-CC2650: issue

vaibhavi pandit

Part Number: LAUNCHXL-CC2650
Other Parts Discussed in Thread: CC2650, Z-STACK, CC2630, CC2530EM

i am vaibhavi

i am working on a project and i am not able to understand how to start with my code. i want a example code for setting a communication using zigbee between two CC2650.

please help me

thanking you.

over 8 years ago

0 JasonB over 8 years ago

TI__Expert 8950 points

Hi Vaibhavi,

In standalone mode, the CC2650 device can only function as a ZigBee end device node due to flash memory constraints. If you would like your CC2650 launchpad to function as a ZigBee Coordinator, it must be run in ZAP-ZNP mode, where the Launchpad acts as a ZNP using the coordinator ZNP image provided with Z-Stack, and you use, for instance, a computer as the ZAP running our ZNP host framework.

Also, out of the box the CC2650 launchpad is not supported by any sample projects, but we have provided a porting guide here:
processors.wiki.ti.com/.../CC2650_LaunchPad_User's_Guide_for_ZigBee

Z-Stack Home Automation 1.2.2a for the CC2630/50 is available here:
www.ti.com/.../z-stack-archive

ZNP Host Framework is available here:
git.ti.com/.../znp-host-framework

If you would like a development platform that can act as a ZigBee coordinator or router in standalone mode, available platforms include the SmartRF05 + CC2530EM and the SmartRF06 + CC2538EM.

0 Madhav shirdhone over 8 years ago in reply to JasonB

Prodigy 60 points

hello vaibhavi,

have you tried above solution for standalone?? if yes, please can you tell me other than that what are the changes you made because while compiling this i am getting compiler error or anyone else if you have solution please share it ll be helpful.

0 YiKai Chen over 8 years ago in reply to Madhav shirdhone

Guru 735695 points

Could you describe which example you are compiling and what error you get?

Zigbee & Thread

Zigbee & Thread forum

LAUNCHXL-CC2650: issue