ZMacMemError

Hello all ,

I have two devices using ZigBee (znp) , both are in home automation profile , one is a router and one is a coordinator.

the router send join request to the coordinator and I'm getting in the router side a status that equals to 19 in ZDO_JOIN_CNF indication.

I can't find out what this value means , does anyone knows?

 

I found out what this status means : ZMacMemError
does any one know what is ZMacMemError and why I'm getting this status in ZDO_JOIN_CNF indication.

Which Z-Stack version do you test? Can you elaborate your test steps?

Which Z-Stack version do you test? Can you elaborate your test steps?

I'm using version 2.6.3 A
this are the steps I made:
the router made :
- discover request with a channels mask that includes the channel that the coordinator is listening on
- the router got beacon indication with the information of the coordinator.
- the router send join request
- then the router gets a status of 19 (ZMacMemError) in ZDO_JOIN_CNF indication.

I did another test:
-the coordinator is listening for example on channel 0x0E , the router sends a discovery request with channel mask that permit only channel 0x0E .
- the router gets beacon indication with the information of the coordinator.
- the router send join request
-the slave joins the coordinator network

only when the slave is listening on multiple channels this problem accours (and not all the time).

1. Can you specify Z-Stack version? Is it Z-Stack Home 1.2.2a?
2. Do you see this issue on ZTOOL?

yes this is Z-Stack Home 1.2.2a
what is ZTOOL?

ZTOOL is a PC application for developer to test ZNP from PC.

do you have any idea what am I doing wrong?

I don't have clues according to your descriptions. Do you use prebuilt ZNP hex for your test or you revise ZNP source code to build your own ZNP firmware to test?