CC2520: CC2520, MSP430F2618

Joseph, han

Intellectual 800 points

Part Number: CC2520
Other Parts Discussed in Thread: MSP430F2618

Hi.

My PCB is MSP430F2618 and CC2520.

I referred SWRS068 sheet(32page).

I want to measure CC2520 RSSI in SmartRF Studio 7.

When start button press in Packet TX tab, packet sniffer captured only 1 in picture.

And message is "Sending of packet failed."

over 9 years ago

0 JasonB over 9 years ago

TI__Expert 8950 points

Hi,

Are you using the latest SmartRF Studio release?

It sounds like you are using a custom PCB. Have you verified that it works in standalone mode with some firmware on it?

0 Joseph, han over 9 years ago in reply to JasonB

Intellectual 800 points

Hi,

1. SmartRF Studio is a lastest version 7.

2. My PCB is custom.

And My PCB is verified coordinator & end device.

I want to measure each RSSI value in mass production.

0 Joseph, han over 9 years ago

Intellectual 800 points

Part Number: MSP430F2618

How do you test PER MSP430F2618 & CC2520?

I want to test in SmartRF Studio 7.

Regard.

Zigbee & Thread

Zigbee & Thread forum

CC2520: CC2520, MSP430F2618