Temperature sensor

Samuel Zottis Dal Magro

Expert 1780 points

Other Parts Discussed in Thread: CC2538

Hello.

How to use the cc2538 with the BME280 temperature and humidity sensor.

Do you have a library for this?

Thank you!

0 YiKai Chen over 8 years ago

Guru 735695 points

You can download CC2538 Foundation Firmware from www.ti.com/.../cc2538-sw and find I2C example in it. You can try to use the driver to read BME280.

0 Samuel Zottis Dal Magro over 8 years ago in reply to YiKai Chen

Expert 1780 points

How do I use the driver after download?

Thank.

0 YiKai Chen over 8 years ago in reply to Samuel Zottis Dal Magro

Guru 735695 points

You can study the I2C driver example and revise it for your BME280 accordingly.

0 Samuel Zottis Dal Magro over 8 years ago in reply to YiKai Chen

Expert 1780 points

Thank you!
Could you tell me a brief example of how to do it?

0 YiKai Chen over 8 years ago in reply to Samuel Zottis Dal Magro

Guru 735695 points

I don't have any brief example to show you how to do it.

0 Samuel Zottis Dal Magro over 8 years ago in reply to YiKai Chen

Expert 1780 points

Many thanks Yikai.

I'll try any return question.

0 YiKai Chen over 8 years ago in reply to Samuel Zottis Dal Magro

Guru 735695 points

You are welcome.

Zigbee & Thread forum