default link key

uria zimmer

Intellectual 550 points

Other Parts Discussed in Thread: Z-STACK

hello ,

does any one know what is the default link key (all of the 32 bytes)?

there is an eight bytes in the start , then ZigbeeAlliance09 and then 8 more bytes.

I want to know what are the eight first bytes and the last eight bytes in the default Link key.

over 8 years ago

0 YiKai Chen over 8 years ago

Guru 735695 points

The default TC link key of Zigbee HA profile is 16 bytes and it is 'ZigbeeAlliance09'.

0 uria zimmer over 8 years ago in reply to YiKai Chen

Intellectual 550 points

I want to write to the NV ITEM ZCD_NV_TCLK_TABLE_START.
byte format of NV item value:

8 bytes : Extended Address 16 bytes: default link key
16 bytes: Key Data
4 bytes : Tx Frame Counter
4 bytes : Rx Frame Counter

I want to know what is written in the first 8 bytes and the last 8 bytes (the default value)

0 YiKai Chen over 8 years ago in reply to uria zimmer

Guru 735695 points

Try to refer to section 10.6.2 in Z-Stack Developer's Guide.pdf

Zigbee & Thread

Zigbee & Thread forum

default link key