Linux/CC2630: CC2630 and Philips Hue bulb (under Linux & ARM CPU)

SimpleSoft

Intellectual 840 points

Part Number: CC2630
Other Parts Discussed in Thread: Z-STACK, , CC2531

Tool/software: Linux

Hi,

Is it possible to control Philips HUE bulb with CC2630 + Z-Stack_Linux_Gateway on ARM processor?

Thank you!

over 8 years ago

0 YiKai Chen over 8 years ago

Guru 735695 points

Yes, it is possible. The original Z-Stack Linux GW reference design uses CC2531 USB dongle. If you intend to use CC2630, you have to rebuild CC2630 ZNP by yourself to make it work with GW. Besides, you would need tool to reset Phillips Hue to make it send beacon requests to join GW.

0 SimpleSoft over 8 years ago in reply to YiKai Chen

Intellectual 840 points

Thank you for a good news.

Im using zstack_home_1_02_02a_44539 sources with IAR ARM. I built "ZNP - Coordinator - Pro Secure Link Key Join".

ARM Linux server application able to coomunicate with CC2630 chip.

Gateway window:

Packet sniff by CC2531 - Hue bulb on, GW join on:

0 YiKai Chen over 8 years ago in reply to SimpleSoft

Guru 735695 points

Do you have problem?

0 SimpleSoft over 8 years ago in reply to YiKai Chen

Intellectual 840 points

Linux application cannot detect Hue lamp - this is main problem

0 YiKai Chen over 8 years ago in reply to SimpleSoft

Guru 735695 points

Can you attach your psd file?

0 SimpleSoft over 8 years ago in reply to YiKai Chen

Intellectual 840 points

hue_lamp_linux_gw.psdYes, sure.

0 YiKai Chen over 8 years ago in reply to SimpleSoft

Guru 735695 points

I don't see Hue sends beacon request to join. Do you do factory reset to your Philips Hue?

0 SimpleSoft over 8 years ago in reply to YiKai Chen

Intellectual 840 points

This lamp never been linked to Philips Hub before (its new from the box).

0 YiKai Chen over 8 years ago in reply to SimpleSoft

Guru 735695 points

Try to enable permit join on your Linux GW and turn on Hue immediately to see if it can join. Please do sniffer log when you test this. If it doesn't work, attach the sniffer to me again.

0 SimpleSoft over 8 years ago in reply to YiKai Chen

Intellectual 840 points

Thank you for replay. I will try to do it again.

0 YiKai Chen over 8 years ago in reply to SimpleSoft

Guru 735695 points

You are welcome.

0 SimpleSoft over 8 years ago in reply to SimpleSoft

Intellectual 840 points

hue_lamp_linux_gw2.psd

0 SimpleSoft over 8 years ago in reply to SimpleSoft

Intellectual 840 points

Dear YiKai Chen, This is Protocol Sniffer log file where several times i made sequence test your requested.
Can you kindly check ? Can you also give me example where lamp sending join request?

thank you!

0 YiKai Chen over 8 years ago in reply to SimpleSoft

Guru 735695 points

I see there is a device sends beacon requests and coordinator responds beacon frame. However, the device doesn't send association request and I don't know if it is Hue. If it is possible, I suggest you to find a way to reset your Hue to test again.

0 SimpleSoft over 8 years ago in reply to YiKai Chen

Intellectual 840 points

Communication between lamp and Hub - lamp_hub.psd

0 YiKai Chen over 8 years ago in reply to SimpleSoft

Guru 735695 points

What do you mean lamp and Hub here?

0 SimpleSoft over 8 years ago in reply to YiKai Chen

Intellectual 840 points

lamp - Philips Hue bulb
Hub - Philips Hue Hub 2.1

0 YiKai Chen over 8 years ago in reply to SimpleSoft

Guru 735695 points

I don't have network key for Philips Hue Hub so I cannot decrypt the message. But, why you wan to show me with this sniffer log?

0 SimpleSoft over 8 years ago in reply to SimpleSoft

Intellectual 840 points

try_unbing_lamp.psd

0 SimpleSoft over 8 years ago in reply to SimpleSoft

Intellectual 840 points

This try to unbind lamp with Philips Hue application (android). Seems lamp do not want to leave ZLL network.

Do you have any idea how convince to connect to HA network?

0 YiKai Chen over 8 years ago in reply to SimpleSoft

Guru 735695 points

Try to refer to the discussions at

0 SimpleSoft over 8 years ago in reply to YiKai Chen

Intellectual 840 points

Thank you a lot. It works perfect!

I bought Philips IRIS lamp . It comes with remote control :

this remte control can unpair Philips Hue from Hub and link to my CC2630 chip + Linux gateway.

Zigbee & Thread

Zigbee & Thread forum

Linux/CC2630: CC2630 and Philips Hue bulb (under Linux & ARM CPU)