RTOS/CC2630: Missing header files

Scott Elliott

Part Number: CC2630
Other Parts Discussed in Thread: SYSBIOS, Z-STACK, TIMAC,

Tool/software: TI-RTOS

I'm updating a legacy product from TI-RTOS 2_11_01_09, bios 6_41_02_41 to the most current AND move it from IAR to CCS. Beyound the usual wack-a-mole include path resolution chances, I seem to be missing a couple of files:

\products\bios_6_41_02_41\packages\ti\sysbios\family\arm\cc26xx\PowerCC2650.h

and

products\bios_6_41_02_41\packages\ti\sysbios\family\arm\cc26xx\/Power.h

Their path may not have been in the original location???

Have these files been renamed? How do I resolve these missing files? Is there a driver's package I need to download?

over 8 years ago

0 JasonB over 8 years ago

TI__Expert 8950 points

Hi Scott,

Migrating a legacy stack to one of the newer TI-RTOS releases is no simple task, many modules were refactored between TI-RTOS product versions and as a result there is not a simple way to do the migration. What stack are you using? If it is Z-Stack Home 1.2.2a for CC26xx, you may not be able to compile it with CCS either due to code size.

0 Scott Elliott over 8 years ago in reply to JasonB

Prodigy 220 points

We only need a 15.4 stack, not ZigBee.

0 YiKai Chen over 8 years ago in reply to Scott Elliott

Guru 735695 points

Where do you get 15.4 Stack for CC2630? Is it form TIMAC?

0 Scott Elliott over 8 years ago in reply to YiKai Chen

Prodigy 220 points

TIMAC

0 YiKai Chen over 8 years ago in reply to Scott Elliott

Guru 735695 points

As I know, TIMAC can only be built by IAR too. Not CCS.

Zigbee & Thread

Zigbee & Thread forum

RTOS/CC2630: Missing header files