CC2538EMK: LED 2,3,4 NOT WORKING(SMARTRF06 EB)

Winston Jacob

Part Number: CC2538EMK
Other Parts Discussed in Thread: CC2538

Hi,

I'm working in CC2538EM and smartrf06 evaluation board, I want to toggle the LED 2,3,4. But it was not happened, but I can toggle the LED1(perfectly work). How to solve this issue, please give the suggestion.

Regards

Winston Jacob

over 8 years ago

0 YiKai Chen over 8 years ago

Guru 735685 points

There is LED example in CC2538 Foundation Firmware.

0 Winston Jacob over 8 years ago in reply to YiKai Chen

Prodigy 105 points

Hi YiKai Chen,
Thanks for reply. I'm using that code only, I can't toggle LED 2,3,4 but I can toggle LED 1, Is their any Jumber replacement needed for this issue in smartrf06 evaluation board.

0 YiKai Chen over 8 years ago in reply to Winston Jacob

Guru 735685 points

I test with leds examples under cc2538_foundation_firmware_1_0_1_0\bsp\srf06eb_cc2538\examples\leds and I can see all of LED1 to LED4 do blinking if I set "bspLedToggle(BSP_LED_2|BSP_LED_3|BSP_LED_1|BSP_LED_4);" instead of "bspLedToggle(BSP_LED_2|BSP_LED_3);"

Zigbee & Thread

Zigbee & Thread forum

CC2538EMK: LED 2,3,4 NOT WORKING(SMARTRF06 EB)