CC2530: Network Signal Strength API

Ajit_Wadekar

Part Number: CC2530
Other Parts Discussed in Thread: Z-STACK,

Hello,

I am using Z-Stack 3.0.1 HA for my Application Development, here I need to measure the signal strength of the neighbouring device.

Here can anyone tell me which API can I use to do this?

0 YiKai Chen over 8 years ago

Guru 735695 points

You can use ZDP_MgmtLqiReq.

0 Ajit_Wadekar over 8 years ago in reply to YiKai Chen

Dear Yikai,

But Here I can't get the RSSI of the device?

As per the Document in Z-Stack API it gives list of devices.

0 YiKai Chen over 8 years ago

Guru 735695 points

You can try to define ZCL_DIAGNOSTIC and use ZCL_CLUSTER_ID_HA_DIAGNOSTIC to do it.

0 Ajit_Wadekar over 8 years ago in reply to YiKai Chen

Dear Yikai,

Can you please guide me to the Document regarding this.

0 YiKai Chen over 8 years ago in reply to Ajit_Wadekar

Guru 735695 points

There is no Z-Stack document for this. You have to read ZCL spec and implement the code by yourself.

0 Ajit_Wadekar over 8 years ago in reply to YiKai Chen

Dear Yikai,

Thank you. This can be used over ZigBee to Read RSSI. We can also use "RSSI Location Cluster" as mentioned in Zigbee Cluster Library for the same.

But how do I read the RSSI on CC2530 Controller (at Hardware Level)?

0 YiKai Chen over 8 years ago in reply to Ajit_Wadekar

Guru 735695 points

Read it from afBuildMSGIncoming

0 Ajit_Wadekar over 8 years ago in reply to YiKai Chen

Thank you Yikai. Will look into it and will get back to you

Zigbee & Thread forum