CC2530: Creating groups

Zarko Kostadinovski

Prodigy 130 points

Part Number: CC2530
Other Parts Discussed in Thread: Z-STACK

How can I create groups? Is there any software example available?

over 8 years ago

0 YiKai Chen over 8 years ago

Guru 735695 points

Do you mean Zigbee group? If so, you can refer to ZCL spec for add group command.

0 Zarko Kostadinovski over 8 years ago in reply to YiKai Chen

Prodigy 130 points

Hi YK Chen,

Yes, I mean ZigBee group. Is there sample code available for creating ZigBee groups, binding to groups, etc?

Regards

0 YiKai Chen over 8 years ago in reply to Zarko Kostadinovski

Guru 735695 points

I know Z-Stack Linux Home GW Reference design implements group commands so you can study it.

0 Zarko Kostadinovski over 8 years ago in reply to YiKai Chen

Prodigy 130 points

As far I can see Linux Home GW source is available only for Linux Application. What about firmware for the dongle, is that source available?

0 YiKai Chen over 8 years ago in reply to Zarko Kostadinovski

Guru 735695 points

The source of dongle is ZNP example which you can find under Z-Stack folder. However, it’s nothing to do with ZCL group commands. ZCL group command is application controlled.

Zigbee & Thread

Zigbee & Thread forum

CC2530: Creating groups