CC2530: Power Configuration Cluster & Report to Coordinator

Jack Loop

Part Number: CC2530
Other Parts Discussed in Thread: Z-STACK

Hi. I am trying to make my CC2530 read the power that is left of a 3v 1500mah battery and report the power left to the coordinator every 10 seconds. How can I do this with the power configuration cluster (0x0001)?

pg 185 https://www.nxp.com/docs/en/user-guide/JN-UG-3115.pdf

over 8 years ago

0 JasonB over 8 years ago

TI__Expert 8950 points

Hi,

The power configuration cluster has a large set of information it can keep track of, you can check the ZCL v6 specification to know exactly what it can do. As far as reading battery voltage, that is a hardware action, you can search around online for how to do this and use the ADC implementation provided in hal_adc.c which you can find in Z-Stack.

www.zigbee.org/.../07-5123-06-zigbee-cluster-library-specification.pdf

Zigbee & Thread

Zigbee & Thread forum

CC2530: Power Configuration Cluster & Report to Coordinator