Compiler: IAR Workbench

Arturo Arenas

Other Parts Discussed in Thread: CC2530, Z-STACK, CC2530EM

Tool/software: TI C/C++ Compiler

Hello,

I want to develop a solution using the cc2530 device. The solution needs create severals End Points and severals AccesPoints. My questions is, exist a example or source code demo for this solutions or what recommend you do for solve this.

Best Regards.

over 8 years ago

0 JasonB over 8 years ago

TI__Expert 8950 points

Hi,

Are you interested in using Zigbee? If so, you can use Z-stack 3.0.1 for CC2530 http://www.ti.com/tool/z-stack

0 Arturo Arenas over 8 years ago in reply to JasonB

Prodigy 100 points

Hi,

Yes, I'm using Z-stack but when i try to use severals end points and severals acces point i get a problem with the nwk_freeConnection() and nwk_disconnect functions and i can't solve this issue. I can disconnect the end point but in the acces point the disconnect not work.

Best regards.

0 JasonB over 8 years ago in reply to Arturo Arenas

TI__Expert 8950 points

Hi,

Can you please provide more details about the issue you are experiencing? Are you using CC2530DK, if not what is your hardware setup? What Z-Stack version are you using (hopefully Z-Stack 3.0.1)?

Can you please post a sniffer log of the issue?

0 Arturo Arenas over 8 years ago in reply to JasonB

Prodigy 100 points

Hi,

Thanks for your fast answer. Yes i can provide you more details with the log of the sniffer and if you want the source code, please just let me a bit time for find the project. I'm using cc2530EM device with Z-Stack 3.0.1.

Regards,

Arturo

0 YiKai Chen over 8 years ago

Guru 735695 points

For multiple endpoints application, you can refer to SampleSwitch OTA example which use two endpoints, one is for switch and another is for OTA.

Zigbee & Thread

Zigbee & Thread forum

Compiler: IAR Workbench