CC2650STK: what is the application of DRV5032FBDBZR in cc2650stk

Dhanraj

Guru 14820 points

Part Number: CC2650STK
Other Parts Discussed in Thread: HDC1000

Hello all,

what is the application of DRV5032FBDBZR in cc2650stk?

0 YiKai Chen over 7 years ago

Guru 735685 points

It can be used as a door contact sensor.

0 Dhanraj over 7 years ago in reply to YiKai Chen

Guru 14820 points

HDC1000 give both temperature and humidity , then why TMP007 is also included??

0 YiKai Chen over 7 years ago in reply to Dhanraj

Guru 735685 points

It a demo board to show different kind of sensors.

0 Dhanraj over 7 years ago in reply to YiKai Chen

Guru 14820 points

In the STK design, only one SPH0644LM4H MEMS Microphone is used for noise level detection,

But per the sensor datasheet in typical application circuit, 2 sensors should be used.

I want to understand does 1 sensor is enough for noise detection,

0 Ryan Brown1 over 7 years ago in reply to Dhanraj

This is most likely application-specific and outside the scope of this Forum.

Regards,
Ryan

0 Dhanraj over 7 years ago in reply to Ryan Brown1

Guru 14820 points

Then for what kind of target application this sensor is included in STK, what feature TI intend to demonstrate by including this sensor in STK

0 Ryan Brown1 over 7 years ago in reply to Dhanraj

YiKai Chen said:
It a demo board to show different kind of sensors.

Regards, Ryan

0 YiKai Chen over 7 years ago in reply to Dhanraj

Guru 735685 points

In TI BLE Stack, SensorTag examples cover all those sensors.

Zigbee & Thread forum