Compiler/CC2530: Connected between router and coordinator

quang nguyen76

Part Number: CC2530
Other Parts Discussed in Thread: Z-STACK

Tool/software: TI C/C++ Compiler

Hello.

I am using generic_app in z-stack 3.0.1 to set a network have one router and one coordinator. If i need add more API or processors define for router connect to coordinator ?

Thanks

over 7 years ago

0 YiKai Chen over 7 years ago

Guru 735695 points

Couldn’t understand your question. Can you elaborate?

0 quang nguyen76 over 7 years ago in reply to YiKai Chen

Expert 1370 points

I use generic_app to create a coordinator and router. After i start coord and router, if router auto join in network or i have to add some api for this action ?

0 YiKai Chen over 7 years ago in reply to quang nguyen76

Guru 735695 points

Do you use TI CC2530ZDK to test this?

0 quang nguyen76 over 7 years ago in reply to YiKai Chen

Expert 1370 points

No. it is ZB502 board with XCore2530 module

0 YiKai Chen over 7 years ago in reply to quang nguyen76

Guru 735695 points

Then, I suppose you have to call "bdb_StartCommissioning(BDB_COMMISSIONING_MODE_NWK_FORMATION)" in your coordinator application init to form Zigbee network and call "bdb_StartCommissioning(BDB_COMMISSIONING_MODE_NWK_STEERING)" in your device application init to make device to find network to join.

Zigbee & Thread

Zigbee & Thread forum

Compiler/CC2530: Connected between router and coordinator