• State Resolved
  • Locked Locked
  • Replies 3 replies
  • Subscribers 56 subscribers
  • Views 1109 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CC2652R: I am using CC2652R MCU for a home automation project and need a Ethernet connection for it . Is there any other way than using another controller like Raspberry Pi or Beaglebone Black? If not , which one is best suited for home automation as a s

prathamesh deshmukh
Prodigy 40 points
Part Number: CC2652R
Other Parts Discussed in Thread: CC2531EM-IOT-HOME-GATEWAY-RD, Z-STACK,

i am making a mesh network for home automation having 4 nodes , 1 NCP node that is connected to the raspberry pi or beaglebone black which is connected to the wifi router. Is there antthing like Raspbee by Dersden electrik

that can make my job easier.