CC2531: Running CC2530 Z-Stack based code on CC2531

Abhay Joshi

Part Number: CC2531
Other Parts Discussed in Thread: CC2530, , Z-STACK

I am trying to use the CC2530 Z-Stack based code on CC2531. I was able to build the code. However, when I try to run the code itis hanging at MAC_RADIO_TIMER_WAKE_UP().

What could be the reason ?

over 8 years ago

0 YiKai Chen over 8 years ago

Guru 735705 points

Do you use your own CC2531 custom board?

0 Abhay Joshi over 8 years ago in reply to YiKai Chen

Intellectual 810 points

No We are using CC2531 USB dongle from TI

0 YiKai Chen over 8 years ago in reply to Abhay Joshi

Guru 735705 points

If you build and run CC2531 ZNP example, is it also hanging at MAC_RADIO_TIMER_WAKE_UP?

0 Ryan Brown1 over 8 years ago in reply to Abhay Joshi

TI__Guru**** 223727 points

The on-board external oscillator could be faulty, do you have a second USB dongle to test with?

Regards,
Ryan

0 Abhay Joshi over 8 years ago in reply to Ryan Brown1

Intellectual 810 points

Hello Ryan,

I am able to run other sample applications meant for CC2531 without any issues on the very same dongle. What kind of porting would be required in order to run the samples, including key control? Is there any reference available?

0 Ryan Brown1 over 8 years ago in reply to Abhay Joshi

TI__Guru**** 223727 points

Please supply a list of TI-provided examples (including build configuration and stack version) that you've tried on the CC2531 USB dongle and provide the status of each (operational or hung up).

Regards,
Ryan

0 Ryan Brown1 over 8 years ago in reply to Ryan Brown1

TI__Guru**** 223727 points

Hello Abhay,

Do you have any update to provide or is your issue resolved?

Edit: Will close the thread until more information is provided.

Regards,
Ryan

0 Abhay Joshi over 8 years ago in reply to Ryan Brown1

Intellectual 810 points

Hello Ryan,

I have got a CC2530 Board which I am currently using. I will get back to this issue at a later point of time. Thanks for the support.

Zigbee & Thread

Zigbee & Thread forum

CC2531: Running CC2530 Z-Stack based code on CC2531