RTOS/CC2538: C-RUN showing Code size limit exceeded

chethan sv

Expert 1040 points

Part Number: CC2538

Tool/software: TI-RTOS

Hi,

I'm facing code size limit exceeded. How to solve this one?

Error[Og008]: Code size limit exceeded. 15 006 code bytes is more than the limit of 12 288 bytes.

Error[Og008]: Code size limit exceeded. 13 644 code bytes is more than the limit of 12 288 bytes.

over 7 years ago

0 YiKai Chen over 7 years ago

Guru 735685 points

Try to refer to processors.wiki.ti.com/.../Optimizing_Flash_and_RAM_Usage_of_Z-Stack_for_CC2530

0 Ryan Brown1 over 7 years ago

TI__Guru**** 217867 points

Hi chethan,

Are you using a full IAR version w/license or the free Kickstart? Have you modified the linker file to utilize all 32 kB of RAM? processors.wiki.ti.com/.../Zigbee_Known_Issues_and_Proposed_Fixes

Regards,
Ryan

0 chethan sv over 7 years ago in reply to Ryan Brown1

Expert 1040 points

Hi Ryan Brown1,

Yes, I'm using Full IAR version.
No, I didn't change any linker file.

where is that linker file? How will I make use all 32 kB of RAM?

0 Ryan Brown1 over 7 years ago in reply to chethan sv

TI__Guru**** 217867 points

Project Options -> Linker -> Config shows the location of your .icf config file and the Wiki provided gives instructions on how to change it accordingly.

Regards,
Ryan

Zigbee & Thread

Zigbee & Thread forum

RTOS/CC2538: C-RUN showing Code size limit exceeded