CC2530: Gateway application reporting capabilities

Marat Akhmetov

Part Number: CC2530

I'm writing a new application on top of the Home Automation Gateway. Some of my devices have reporting capabilities and they do reporting to bound devices. I want my application to show (update) those reported values on the screen. Is it possible to "intercept" those reporting messages or do I need to create multiple endpoints on a gateway and bind them to respective reporting devices?

over 7 years ago

0 YiKai Chen over 7 years ago

Guru 735695 points

I suppose you can receive on the endpoint that already binding with the sensor. I think there’s no need to do another binding to another endpoint.

0 Marat Akhmetov over 7 years ago in reply to YiKai Chen

Intellectual 560 points

Chen, here is an example. Temperature sensor reports its value to the Thermostat. BUT I want the same value to be displayed (refreshed) on my PC application (which as a Gateway application). How can PC application be notified of a new value?

0 YiKai Chen over 7 years ago in reply to Marat Akhmetov

Guru 735695 points

In this case, I agree with you that you have to do another binding ton make temperature sensor also report temperature to your PC.

Zigbee & Thread

Zigbee & Thread forum

CC2530: Gateway application reporting capabilities