CC2592: CC2592 with Balun

Batuhan Altinsoy

Part Number: CC2592

Hello everyone,

I want to reduce space on the PCB and antenna matching circuit between the antenna and cc2592 is taking lots of places. Can I use a balun (or any other matching component) between the CC2592 and antenna?

Thanks.

over 7 years ago

0 TER over 7 years ago

TI__Guru**** 317180 points

No, this does not exist, you have to follow the reference design.

0 Batuhan Altinsoy over 7 years ago in reply to TER

Prodigy 60 points

Okay, can I change the track shape instead?

Like following the blue track on the image? Track length will be the same of course.

Thanks.

0 TER over 7 years ago in reply to Batuhan Altinsoy

TI__Guru**** 317180 points

That will be very dependent on how you place and layout the components. If the RF path is not straight as in the ref design it's a risk that partf the signal could bypass parts of the filter and resulting in too high harmonics.

0 Batuhan Altinsoy over 7 years ago in reply to TER

Prodigy 60 points

Thanks for the help, I will try different designs and compare the radio performances.

Zigbee & Thread

Zigbee & Thread forum

CC2592: CC2592 with Balun