Z-Stack 3.0.1 CCS support

DTeo

Other Parts Discussed in Thread: CC2650, Z-STACK

Hi,

I have a customer who is interested to use the Z-Stack 3.0.1 with the CC2650. However, he would like to use CCS instead of IAR. Will there be a CCS version for this stack?

Thanks and best regards,

Dunman Teo

over 7 years ago

0 YiKai Chen over 7 years ago

Guru 735695 points

There is no such combination. CC2650 has limit RAM/Flash and it's not recommended for Zigbee 3.0. I suggest you to use CC2652 instead of CC2650 and you can download SIMPLELINK-CC26X2-SDK and Zigbee plugin from www.ti.com/.../SIMPLELINK-CC26X2-SDK

0 Lawrence Lin over 7 years ago in reply to YiKai Chen

Genius 4755 points

Hi YK and TI team,
I read this question and I want to double confirm some questions for your responses.

1.Does the Zigbee API and example codes support in CCS if I use the CC2652 and the latest SDK of SIMPLELINK-CC26X2-SDK and Zigbee plugin
that comes form the web site of www.ti.com/.../SIMPLELINK-CC26X2-SDK?

2. Whether I can use these Zigbee API and example codes that support in CCS to make my CC2652 devices be a end-device,router or coordinator
in Zigbee home network?

Because based on my studying the Z-Stack and Z-stack home1.2.2a just support in the IAR, I need to confirm it again.

Thanks

0 YiKai Chen over 7 years ago in reply to Lawrence Lin

Guru 735695 points

1. Yes
2. Yes

0 Lawrence Lin over 7 years ago in reply to YiKai Chen

Genius 4755 points

Hi YK,
Noted.
Thanks

0 Lawrence Lin over 7 years ago in reply to Lawrence Lin

Genius 4755 points

Hi YK,
Does the latest SDK( SIMPLELINK-CC26X2-SDK and Zigbee plugin) of CC2652 support the drivers of I2C and SPI?
Thanks

0 YiKai Chen over 7 years ago in reply to Lawrence Lin

Guru 735695 points

Yes

0 Lawrence Lin over 7 years ago in reply to YiKai Chen

Genius 4755 points

Hi YK
Thanks

Zigbee & Thread

Zigbee & Thread forum

Z-Stack 3.0.1 CCS support