CC2652R: How to program CC2652

Walter Macamos

Genius 5345 points

Part Number: CC2652R
Other Parts Discussed in Thread: UNIFLASH, , MSP-FET

Hi TI Team,

We planning to integrate this device to our IOT project.

How to flash the firmware to the chip when already integrated in our pcb board.

Regards,

Walter

over 7 years ago

0 YiKai Chen over 7 years ago

Guru 735695 points

You have to use Uniflash to download firmware to CC2652R.

0 Pavel Kosenko over 7 years ago in reply to YiKai Chen

Genius 4540 points

Also you can use OAD.

0 Walter Macamos over 7 years ago in reply to Pavel Kosenko

Genius 5345 points

Hi Pavel,

No, in-circuit programming? I think JTAG should be able to do it right?
www.ti.com/.../slau320ad.pdf

Regards,
Walter

0 Walter Macamos over 7 years ago in reply to Walter Macamos

Genius 5345 points

Hi YK,

The uniflash I believe needs USB connector? I am referring to in-circuit programming like jtag?

Regards,
Walter

0 YiKai Chen over 7 years ago in reply to Walter Macamos

Guru 735695 points

To program CC2652R, you have to use XDS110.

0 Walter Macamos over 7 years ago in reply to Walter Macamos

Genius 5345 points

We have a project with two TI chips:

1. MSP430
2. CC2652

Can we use for both for flashing firmware via JTAG?
- Uniflash
- XDS110 Debug Probe

Regards,
Walter

0 YiKai Chen over 7 years ago in reply to Walter Macamos

Guru 735695 points

Uniflash and XDS110 is for CC2652R. For MSP430, you should use MSP-FET and Uniflash .

0 Walter Macamos over 7 years ago in reply to YiKai Chen

Genius 5345 points

Hi YK,

Thank you.

Best Regards,
Walter

Zigbee & Thread

Zigbee & Thread forum

CC2652R: How to program CC2652