CC2538: CC2538 and Z-Stack Linux Gateway Integration

Ajit_Wadekar

Part Number: CC2538
Other Parts Discussed in Thread: Z-STACK

Hello,

I planning to use CC2538 with Z-Stack 3.0 and we want to connect CC2538 with ZNP to BeagleBone through Z-Stack Linux Gateway over UART Communication.

Can any one tell me what modifications are needed on CC2538 ZNP to enable above interface?

over 7 years ago

0 YiKai Chen over 7 years ago

Guru 735695 points

Try to refer to the discussions in

0 Ajit_Wadekar over 7 years ago in reply to YiKai Chen

Mastermind 7620 points

Dear Yikai,

Thanks for the reply.

So basically if I generate a hex file using ENABLE_MT_SYS_RESET_SHUTDOWN flag set, it should work direclty, right ?

And the ZNP will communicate through UART?

0 YiKai Chen over 7 years ago in reply to Ajit_Wadekar

Guru 735695 points

Yes.

0 Ajit_Wadekar over 7 years ago in reply to YiKai Chen

Mastermind 7620 points

OK Thank you.

I will get back to you if I have any issue.

Zigbee & Thread

Zigbee & Thread forum

CC2538: CC2538 and Z-Stack Linux Gateway Integration