CCS/LAUNCHXL-CC1352P: Link project after GIT

Pavel Kosenko

Tool/software: Code Composer Studio

Hi!

I try to save my project to local GIT.

But when I restored (import) my priject from Git I can compile but not can link - the linker not found all obj- file. I check the all obj file create always.

I check path in comliler setting but not found mistake. I think i missed something but I don't understand that i missed..

Do you have idea?

over 6 years ago

0 Sean2 over 6 years ago

TI__Mastermind 33460 points

Hi Pavel,

In general it is best to not check in built files such as .obj or .hex or .out. Instead, it is best to check in both the source code and the project files needed to build it. In your case I would expect that one of the .objs is missed.

I recommend taking the former approach. If you wish to have built files stored in your git, instead just check in the .out files.

0 Pavel Kosenko over 6 years ago in reply to Sean2

Genius 4540 points

Undestand you. I will check again my project. But how I undestand if my project was compile I have all obj files for this project. Am I right?

0 Sean2 over 6 years ago in reply to Pavel Kosenko

TI__Mastermind 33460 points

Yes if you check all these files in they should be there. The build logs should indicate which object is missing.

0 Pavel Kosenko over 6 years ago in reply to Sean2

Genius 4540 points

Thank you! It is good idea. I Check log.

0 Pavel Kosenko over 6 years ago in reply to Pavel Kosenko

Genius 4540 points

Sean2!

You was right. After restoring project from git to another folder the project miss ALL virtual folder.

Zigbee & Thread

Zigbee & Thread forum

CCS/LAUNCHXL-CC1352P: Link project after GIT