• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 55 subscribers
  • Views 364 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

problem to connect CCSv5 with xds100v3

SMARTRF06EBK: problem to connect CCSv5 with xds100v3

Jesse Mendez
Prodigy 10 points

Part Number: SMARTRF06EBK

Please provide the Texas Instruments XDS100v3 driver.  I'm using the smart RF Studio 7 v2.2.1 with the smart RF 06 evaluation board. 

  • 0
    TI__Intellectual 2780 points
    Hey Jesse,

    Please refer to the SmartRF06EBK User's Guide (www.ti.com/.../swru321b.pdf) Section 3.1 "Installing SmartRF Studio and USB Drivers" for additional information.

    You can find the drivers will be installed when installing the latest SmartRF Studio. Once you install the latest SmartRF Studio, your device should automatically be recognized by windows.

    The section in the User's Guide I mentioned above tells you how to manually install the USB driver if it is not being recognized.

    Best,
    Sean