CCS/CC2652R: Can CC Debugger program CC2652r or LAUNCHXL-CC26XR1?

Pedro Val

Prodigy 20 points

Part Number: CC2652R
Other Parts Discussed in Thread: LAUNCHXL-CC26X2R1

Tool/software: Code Composer Studio

Can I use CC Debugger to program CC2652r either LAUNCHXL-CC26XR1?

CC Debugger: www.ti.com/.../CC-DEBUGGER

over 7 years ago

0 Fredrik K over 7 years ago

TI__Guru** 106705 points

Hi Pedro,

The CCDebugger only supports the device listed on the page you link to.

The LAUNCHXL-CC26x2R1 contains an onboard debugger (called XDS110), so there is no need for any additional HW.

Cheers,
Fredrik

0 Pedro Val over 7 years ago in reply to Fredrik K

Prodigy 20 points

Hi Fredrik,

But we are developing a circuit based on CC2652/CC2652R, and I need a external HW.
At this moment I'm trying to use a LAUNCHXL-CC26x2R1's onboard debugger to program another Launchpad.

0 Fredrik K over 7 years ago in reply to Pedro Val

TI__Guru** 106705 points

Hi Pedro,

The debugger on the LaunchPad can be used for external targets also. You can either use the XDS110 Out connector or the main jumper block.

Cheers,
Fredrik

Zigbee & Thread

Zigbee & Thread forum

CCS/CC2652R: Can CC Debugger program CC2652r or LAUNCHXL-CC26XR1?