CC2530: Enable/Disable permitjoin of the coordinator running as ZNP

I need to disable the permit join for the coordinator itself. This command is issued to other devices in the network.

I had tried the same thing, coordinator recieved a MT_RPC_SYS_ZDO message but the it says this is an unsupported srsp command .

Which Z-Stack version do you use and do you build ZNP FW by yourself?

We are using Zstack 2.7.1 and the znp FW is from the stack examples.

There is no Z-Stack 2.7.1. Do you mean Z-Stack 3.0.1?

Not 3.0.1 its an older version, where can i find the version in the example code?

THe installation folder name would show you the version. Anyway, ZDO_MGMT_PERMIT_JOIN_REQUEST should work, which you can refer to step 6 in sunmaysky.blogspot.com/.../setup-zigbee-ha-coordinator-with-ti.html and the only difference is to set the duration to 0.

Thank you so much YiKai Chen, it worked and also for the link. Actually I was doing Mistake in forming the request command.

Glad you were able to get help in resolving this issue Aviral! If you are able to, I would recommend trying to switch over to using the latest Z-Stack 3.0.2 version. This was just released recently online, which you can find here: www.ti.com/.../Z-STACK.

Inside the documentation are migration guides on porting your examples over to the newest SDK.

Best,
Sean