CC2592: CC2592 model for RF simulation

Antonio del Río

Part Number: CC2592
Other Parts Discussed in Thread: CC2530

Does TI provide a model for RF simulation of CC2592? We are working on a board based on CC2530+CC2592 using your reference design and we try to tune the output filter. We use ADS for RF simulation purposes.

over 6 years ago

0 Ryan Brown1 over 6 years ago

TI__Guru**** 217737 points

I do not believe that any resources are publicly provided by TI but I will have the hardware team confirm this.

Regards,
Ryan

0 Sverre over 6 years ago in reply to Ryan Brown1

TI__Mastermind 39860 points

We do not have a model. Use ADS and measure the impedance as seen from CC2592 towards the antenna. You circuit needs to be tuned to the same impedance.

Zigbee & Thread

Zigbee & Thread forum

CC2592: CC2592 model for RF simulation