LAUNCHXL-CC1352R1: Zigbee Frequency chnage

venkatesh k29

Part Number: LAUNCHXL-CC1352R1
Other Parts Discussed in Thread: CC1352R

Hi Team,

I am working on CC1352R1 Launchpads. as per Specification it can be used in low frequencies like 868 and 915 MHz.

My question is, how to change the Zigbee communication frequency from 2.4 Ghz to low frequency in light and switch example. what are the changes needed in Configuration.

over 7 years ago

0 YiKai Chen over 7 years ago

Guru 735695 points

TI Zigbee stack only supports 2.4G.

0 venkatesh k29 over 7 years ago in reply to YiKai Chen

Intellectual 540 points

Hi YK chen,
thanks for replay. what are protocols i can use for lower frequency.

0 YiKai Chen over 7 years ago in reply to venkatesh k29

Guru 735695 points

If you mean to use sub GHz, you can use TI 15.4 Stack.

0 venkatesh k29 over 7 years ago in reply to YiKai Chen

Intellectual 540 points

what about thread protocol ?

0 YiKai Chen over 7 years ago in reply to venkatesh k29

Guru 735695 points

Thread protocol works on 2.4G too.

0 venkatesh k29 over 7 years ago in reply to YiKai Chen

Intellectual 540 points

thank you chen,
i want use DMM example in my Application. Can i use CC1352R as a Zigbee Coordinator and CC2652 as a Zigbee End node.

0 YiKai Chen over 7 years ago in reply to venkatesh k29

Guru 735695 points

Yes, you can use CC1352R as a Zigbee Coordinator and CC2652 as a Zigbee End node.

0 venkatesh k29 over 7 years ago in reply to YiKai Chen

Intellectual 540 points

can i use basic example to test the zigbee network. please suggest me any changes are needed in configuration.

0 YiKai Chen over 7 years ago in reply to venkatesh k29

Guru 735695 points

You don’t have to change anything if you use TI LaunchPad. You can start testing from SampleLight and SampleSwitch.

0 venkatesh k29 over 7 years ago in reply to YiKai Chen

Intellectual 540 points

tq, i will check ...

Zigbee & Thread

Zigbee & Thread forum

LAUNCHXL-CC1352R1: Zigbee Frequency chnage