RTOS/CC2650: OTA suport for zStack 3.0

laxmikant chhipa

Prodigy 25 points

Part Number: CC2650
Other Parts Discussed in Thread: CC2652R, CC2560

Tool/software: TI-RTOS

I need OTA support for cc2650. i am working on zigbee. i just need BIM for OTA. any support ?

over 6 years ago

0 YiKai Chen over 6 years ago

Guru 735685 points

CC2650 doesn’t support Zigbee 3.0. If you need Zigbee 3.0, you should use CC2652R and you can find OTA examples at dev.ti.com/.../

0 Ryan Brown1 over 6 years ago in reply to YiKai Chen

TI__Guru**** 218857 points

Nor does the CC2560 Z-STACK-HOME 1.2.2a support OTA functionality. I highly recommend the CC2652R as suggested by YK.

Regards,
Ryan

0 laxmikant chhipa over 6 years ago in reply to YiKai Chen

Prodigy 25 points

hello sir,

thanks for your reply, we are working on zstack since last few months and we are using cc2650 as an end device only.

we have implemented bim for this too yesterday. Can you please tell us why ota cant be implemented in cc2650 with zigbee.
Thank You,
Laxmikant

0 Ryan Brown1 over 6 years ago in reply to laxmikant chhipa

TI__Guru**** 218857 points

Hello Laxmikant,

It is possible but not supported out-of-box for the CC2650 Z-STACK-HOME 1.2.2a due to Zigbee stack size and a limited memory footprint. I will contact you offline with further information.

Regards,
Ryan

Zigbee & Thread

Zigbee & Thread forum

RTOS/CC2650: OTA suport for zStack 3.0