TI cc2531 usb dongle windows 8.1 driver

Navid Razavi

Other Parts Discussed in Thread: CC2531

I can't install TI cc2531 usb dongle on Windows 8.1 x64. Windows list my usb dongle as unknown device and I can't find any proper driver for my TI cc2531 usb dongle.

Any suggestion?

over 6 years ago

0 TER over 6 years ago

TI__Guru**** 317180 points

Do you have SmartRF Studio installed? The interface should work with Studio installed since this also contains drivers.

0 YiKai Chen over 6 years ago

Guru 735695 points

Try attached driver.

2604.win_64bit_x64.zip

0 Navid Razavi over 6 years ago in reply to TER

Prodigy 50 points

Yes, I installed SmartRF Studio before but still windows do not recognize TI cc2531 usb dongle.

0 Navid Razavi over 6 years ago in reply to YiKai Chen

Prodigy 50 points

Thank you for your help but I have the same problem with this driver.

0 TER over 6 years ago in reply to Navid Razavi

TI__Guru**** 317180 points

Do you have a PC with a different version of windows to test on? Do you know the dongle works?

0 YiKai Chen over 6 years ago in reply to Navid Razavi

Guru 735695 points

What SW do you run on CC2531 USB Dongle?

0 Navid Razavi over 6 years ago in reply to TER

Prodigy 50 points

No, I only have windows 8.1 but I tested the dongle with PI3 and CentOS 6.8 and I had same problem on both.

I'm not sure if the dongle works, Device manager in windows recognize it but do not find any drive for it.

0 Navid Razavi over 6 years ago in reply to YiKai Chen

Prodigy 50 points

I'm not sure, How can I check it?

0 YiKai Chen over 6 years ago in reply to Navid Razavi

Guru 735695 points

It seems there’s no SW or wron SW running on your CC2531. I suggest you to use CC Debugger to download Sniffer FW to your CC2531 to test again.

Zigbee & Thread

Zigbee & Thread forum

TI cc2531 usb dongle windows 8.1 driver