LAUNCHXL-CC26X2R1: Zigbee get light status

Tran Van Huy

Hi everyone!

I'm new with Zigbee network and CC26x2 chip.

I'm able to run demo application zc_light and zed_switch in simplelink_cc26x2_sdk_2_30_00_34.

Every I press button on zed_switch board, led in the zc_light board will toggle, and i think zc_light will report ACK signal back to zed_switch board.

I want to know current led status on ZC board, but i can not find any documents describe about it.

Please help me, thank you so much.

over 7 years ago

0 YiKai Chen over 7 years ago

Guru 735695 points

You can check variable OnOff in zclSampleLight_OnOffCB.

0 Tran Van Huy over 7 years ago in reply to YiKai Chen

Prodigy 70 points

Thank you, i understand.

But, I want to get status on the ZC_light and response led status to ZED_Switch
Function zclSampleLight_OnOffCB only exist in ZC_light project, but ZED_switch does not have that function.

0 YiKai Chen over 7 years ago in reply to Tran Van Huy

Guru 735695 points

You can use ZCL read attribute command to read ATTRID_ON_OFF to get zr_light status from zed_swtich.

0 Tran Van Huy over 7 years ago in reply to YiKai Chen

Prodigy 70 points

Thank you so much!

Zigbee & Thread

Zigbee & Thread forum

LAUNCHXL-CC26X2R1: Zigbee get light status