Compiler/CC2530: GenericApp and Samples in z-stack3

betty hl

Expert 2605 points

Part Number: CC2530
Other Parts Discussed in Thread: Z-STACK

Tool/software: TI C/C++ Compiler

Hello,

please tell about differences between genericApp and Samples in z-stack3?

0 YiKai Chen over 7 years ago

Guru 735695 points

genericApp in Z-Stack 3.0.x uses proprietary clusters and attributes and other examples use standard Zigbee cluster library and attributes.

0 betty hl over 7 years ago in reply to YiKai Chen

Expert 2605 points

Tnx sir, so in genereic app, I can do three samples?

0 YiKai Chen over 7 years ago in reply to betty hl

Guru 735695 points

What “three examples “ do you mean here?

0 betty hl over 7 years ago in reply to YiKai Chen

Expert 2605 points

That is, the samples in the zstack can be implemented at the same time in the Generic app?

0 YiKai Chen over 7 years ago in reply to betty hl

Guru 735695 points

For three examples, do you mean coordinator, router, and end device project in GenericApp example?

0 betty hl over 7 years ago in reply to YiKai Chen

Expert 2605 points

no, i means the sample light&switch , sample thermostat&temperature and door lock.

0 YiKai Chen over 7 years ago in reply to betty hl

Guru 735695 points

I am confused by your descriptions. What is your question and what do you intend to do with those examples?

0 betty hl over 7 years ago in reply to YiKai Chen

Expert 2605 points

My problem has been resolved, tnx.

0 YiKai Chen over 7 years ago in reply to betty hl

Guru 735695 points

OK. Please mark this thread as solved. Thanks.

Zigbee & Thread forum