Compiler/CC2530: confirmation of receiving the message

betty hl

Part Number: CC2530

Tool/software: TI C/C++ Compiler

hello

in the sample temperature (transmitter) how can I see confirmation of receiving the message by the sample thermostat (receiver)?

0 YiKai Chen over 6 years ago

Guru 735695 points

You can use APS ack to confirm if the message is delivered.

0 betty hl over 6 years ago in reply to YiKai Chen

Expert 2605 points

how can i use APS ack ?

0 YiKai Chen over 6 years ago in reply to betty hl

Guru 735695 points

Try to refer to discussions in e2e.ti.com/.../312024

0 betty hl over 6 years ago in reply to YiKai Chen

Expert 2605 points

tnx,
In this link tells to see ACK of zcl_SendReportCmd should be checked case AF_INCOMING_MSG_CMD, but this case is not in event Loop
And the link below is not active that I see how to see the ACK of zcl_SendReportCmd.
" e2e.ti.com/.../using-the-af-data-confirm-cmd-system-event-in-the-z-stack-to-track-acknowledgements-zigbee.aspx for details"

0 YiKai Chen over 6 years ago in reply to betty hl

Guru 735695 points

0 betty hl over 6 years ago in reply to YiKai Chen

Expert 2605 points

Thank you

Zigbee & Thread forum