CCS/CC2538: Sample light application for CC2538-92

Prerak Patel

Expert 2230 points

Part Number: CC2538
Other Parts Discussed in Thread: CC2592

Tool/software: Code Composer Studio

Hello

I am using IAR to compile sample light application.

I want to generate bins for different power and channel.

Can you please tell me, from where I can change Power and channel?

Regards,

Prerak

over 7 years ago

0 YiKai Chen over 7 years ago

Guru 735695 points

You can use API macRadioSetTxPower to set TX power in dbm and set channel by revising DEFAULT_CHANLIST in f8wconfig.cfg.

0 Prerak Patel over 7 years ago in reply to YiKai Chen

Expert 2230 points

hi,

Can you tell me if i want to change threshold value, then what is the formula for that ?

Regards,
Prerak

0 YiKai Chen over 7 years ago in reply to Prerak Patel

Guru 735695 points

What do you mean threshold? I suppose you can set TX power up to 22 dbm.

0 Ryan Brown1 over 7 years ago

TI__Guru**** 222447 points

Hello Prerak,

DEFAULT CHANLIST is configurable in f8wConfig.cfg, you will also need to define HAL_PA_LNA_CC2592 from Project Options -> C/C++ Compiler -> Preprocessor -> Defined symbols. macRadioSetTxPower(20) would set TX power to 20 dbm and so forth, this should be done during initialization. Binary image output options can be configured in Project Options -> Output Converter. Also refer to SWRA447: www.ti.com/.../swra447.pdf

Regards,
Ryan

Zigbee & Thread

Zigbee & Thread forum

CCS/CC2538: Sample light application for CC2538-92