CC2530: ZNP and Sample Apps

shahriar gholami

Part Number: CC2530
Other Parts Discussed in Thread: Z-STACK, CC2652R

Hello,

I want to know the basic differences between ZNP and Samlpes in cc2530 since with ZNP we can easily establish serial communication but in samples we have limitations!!! (memory shortage)

and is there any example that implements Z-Stack 3 on an ARM???

over 6 years ago

0 YiKai Chen over 6 years ago

Guru 735695 points

You can use CC2652R which is based on ARM MCU and much more resourceful.

0 Toby over 6 years ago

TI__Mastermind 35070 points

Hi,

Agree with YK, I'd recommend using the CC2652R. We update the SDK quarterly.

ZNP is meant to be controlled by a host, so by default enables the NPI and MT interface.
The sample applications assume that it will run in SOC mode (all processing is done on the CC2530).

Please refer to "Z-Stack ZNP Interface Specfication.pdf" for more details (in <zstack>/Documents/API).

A helpful resource for CC2530 Flash/RAM optimization: http://www.ti.com/lit/wp/swra635/swra635.pdf

Regards,
Toby

Zigbee & Thread

Zigbee & Thread forum

CC2530: ZNP and Sample Apps