CC2530: Auto bind on joining the network

Aviral Gupta

Part Number: CC2530

Hi,

We are using Zstack 302 and a znp coordinator.

How can a router add coordinator to its binding table on joining a network?
I would like the coordinator to receive reports from the router automatically( without the coordinator making a bind request to the router) .

over 6 years ago

0 Ryan Brown1 over 6 years ago

TI__Guru**** 220427 points

Hi Aviral,

"Auto bind" could be accomplished through BDB Finding & Binding but only for devices with matching application clusters. Otherwise since the ZC short address is known (0x0000) you could make a local bind on the router if you know the destination endpoint (you could use ZDP_ActiveEPReq and ZDP_SimpleDescReq to discover this). Here is a useful SLA Lab, although intended for SimpleLink devices: http://dev.ti.com/tirex/explore/node?node=AJeGnyIqlkquNAYMtLtovQ__pTTHBmu__LATEST

Regards,
Ryan

Zigbee & Thread

Zigbee & Thread forum

CC2530: Auto bind on joining the network