CC2530: Data request to znp coordinator

Aviral Gupta

Part Number: CC2530

We are using ZStack302 .

Our system consist of one znp coordinator and end device.

Whenever the end device wakes up it makes a data request to the parent (coordinator).
how can we configure the znp coordinator to receive data request in the host ?

over 6 years ago

0 YiKai Chen over 6 years ago

Guru 735695 points

Data Request is that ZED uses to polling packages from its parent node. There’s no need to configure anything on parent node. What do you mean “ configure the znp coordinator to receive data request in the host ”?

0 Ryan Brown1 over 6 years ago

TI__Guru**** 220577 points

Hi Aviral,

You would need to define MT_MAC_CB_FUNC in the ZNP but this creates an error in ZDApp.c as MT_MAC functionality is disabled in the Zigbee libraries and should not be included in ZDO projects. So you will need to use a different, Zigbee-related keep-alive message, like poll control check-ins: http://dev.ti.com/tirex/explore/node?node=AECfF3L5Mxn7z1WGqXZjYQ__pTTHBmu__LATEST

Regards,
Ryan

Zigbee & Thread

Zigbee & Thread forum

CC2530: Data request to znp coordinator