CC2652R: fastest repeat SendRreport can handle

Walter Macamos

Genius 5345 points

Part Number: CC2652R

Hi TI Team,

We have an issue where a button is clicked repeatedly and send report.

But, we experience it connection always drops when clicked at speed at 1.5 secs in custom board.

What is the minimum time SendReport we can send to keep connection stable.

Regards,

Walter

over 6 years ago

0 IUsedToBeARealPerson (M-W) over 6 years ago

TI__Guru 58425 points

Hi Walter,

Could you be more specific on what kind of report you are talking about (what stack are you using etc.). Also, could you add in the SDK version you use.

0 Marlyn Rosales Castaneda20 over 6 years ago in reply to IUsedToBeARealPerson (M-W)

TI__Mastermind 27090 points

Hi Walter,

Along with M-W's requests could you also state whether you are using a ZR or a ZED?

The minReportInt is the minimum reporting interval. Have you had the chance to look at this, and see if you are passing the minimum or not?

Best Regards,

Marlyn

0 YiKai Chen over 6 years ago

Guru 735695 points

I would suggest you to use sniffer to check what happens over the air.

0 Walter Macamos over 6 years ago in reply to YiKai Chen

Genius 5345 points

Hi Marlyn,

We are using ZED SDK 3.10 zed switch example.

Regards,

Walter

0 Marlyn Rosales Castaneda20 over 6 years ago in reply to Walter Macamos

TI__Mastermind 27090 points

Walter,

Have you checked if your polling requirements are met, and that this does not interfere with the reports sent?

I would suggest capturing a sniffer log as YK suggests in order to see what is happening. Also, please verify the minReportInt as you could be blocked due to this.

Best Regards,

Marlyn

Zigbee & Thread

Zigbee & Thread forum

CC2652R: fastest repeat SendRreport can handle