About ZIGBEE_FREQ_AGILITY flag

terry chang

Prodigy 90 points

Hi All,

I enable the flag ZIGBEE_FREQ_AGILITY in ZStack 2.4.0.

Did I need to write more code to do the FREQ_AGILITY?

Or if the system will do it automatically.

If I need to write more code to implement it, any example code?

Many Thanks.

over 14 years ago

0 The Seven over 9 years ago

Guru 11440 points

do you know what does “ZIGBEE_FREQ_AGILITY” mean ？

0 YiKai Chen over 9 years ago in reply to The Seven

Guru 735685 points

It would enable Zigbee frequency agility. When a network is first formed the node seeks a channel with the least noise or traffic. If over time extra traffic appears or noise becomes present the host application can scan for a better channel and move the whole network to the new channel allowing the network to adapt over time to changing RF environments.

Zigbee & Thread

Zigbee & Thread forum

About ZIGBEE_FREQ_AGILITY flag